DUOYI DY2015A Battery Tester Digital Multimeter Used For activated style acid storage battery. DUOYI DY2015A 12V 24V Car Truck Battery System Tester With LCD Display With Wrong-Polarity And Overload Voltage Protected. DY2015A Automotive Battery System Tester DUOYI DY2015A 12V&24V Automotive Car Truck Starting Battery Tester Fully diagnose car truck battery status and car charging system.  

DUOYI DY2015A Battery Tester Digital Multimeter DUOYI DY2015A 12V 24V Car Truck Battery System Tester With LCD Display With Wrong-Polarity And Overload Voltage Protected

DY2015A Automotive Battery System Tester DUOYI DY2015A 12V&24V Automotive Car Truck Starting Battery Tester Fully diagnose car truck battery status and car charging system

DY2015A Automotive Battery System Tester Description:

This battery testers are used for activated style acid storage battery.
Precise circuit and strong digital processing unit make it complete collection of a series of complicated data and figure out every test data, which availably by 4-wire Kelvin test connection. Besides it strengthens input protection inside , in order to prevent such situations as polar reversal connection, over-high voltage input, poor contact of the test clamps and so on. That makes sure safer and more convenient when testing.
This tester is the best tool for battery sales, vehicle repair and condition check of all kinds of acid batteries that used in equipment system associated with acid battery.

DUOYI DY2015A Battery Tester Digital Multimeter Features:

With large LCD display, easy to read the value
Four tester  Fully diagnose the battery status and car charging system
Battery test: cold cranking amps, battery resistance, voltage, life analysis
Engine system test: the change of battery system with the process of startup
Charging system test: the charging system working state of the output
Maximum load system test: the maximum load state of battery
Rich Parameters measured and displayed for battery condition diagnose
Overload protection and wrong connection protection keeps operator always safe
Easily read out conclusion of battery condition good/OK/pay attention/replace
Loose lead detection, unit conversion CCA/IEC/EN/DIN
Battery conclusion upon rich parameters measured
Wrong-polarity-protected, overload voltage protected

DUOYI DY2015A 12V 24V Car Truck Battery System Tester Specification:                

CCA Range:100~1700
IEC Range:100~1000
EN Range:100~1700
DIN Range:100~1000
JIS:Reference table in manual
Displays Battery Internal Resistance:Display ohms
Displays Battery Voltage:Display volts
Displays Battery Condition:good/OK/pay attention/replace
Test 12V Batteries:√
Battery Recharge Indicator:  √
Reverse Polarity Protection:  √
Detects and Displays Bad cell:  √
Loose Lead Detection:  √
Internal Unit Conversion EN,EIC,DIN:  √
Overload protection of input voltage:  √
Cable Length:700mm
Dimension:180 * 90 * 32 mm
Weight:400 g
NEW UPGRADED! DY2015A 12V Car Battery System Tester Capacity Tester (4 IN 1)Maximum Electronic load Battery Charge Test

How to Use DY2015A Automotive Battery System Tester:

1.Connect the positive and negative poles of the instrument to the positive and negative poles of the car battery.
2.Start the car and start the test.
3. Observe the parameters of the tester and print out the measured data.

DY2015A Automotive Battery System Tester Package include:

1x Storage Battery System Tester
1x Rubber protect sleeve
1x DUOYI DY2015A Automotive Battery System Tester User manual (in English)
1x Quick guide
1x DIN.EN transcoding table


 
The Product Features


FOUR  MAIN  FUNCTIONS



The larger the CCA value of the battery , the internal resistance is generally smaller.

Note:

Preparation before testing - When the car is started, first turn off the fire and turn the key to the OFF position.



The standard voltage is 9.6V. The test result is more than 9.6V,the boot system is normal. (Otherwise,the boot system is abnormal.)

Note:

Preparation before testing - When the car is started, first turn off the fire and turn the key to the OFF position.



If the voltage reading is less than 12.8V (For 24V system <DY2015A>, the reading is less than 25.60V)

Please check whether the generator belt is worn and the wire is short-circuited or not .

Note: Preparation before testing - When the car is off, please start the car engine first.



If the voltage reading > 15.0V (for 24V system <DY2015A>, reading > 30.00V), please check the regulator

If the voltage reading is <13.3V (for 24V system <DY2015A>, reading > 26.60V), please check the connection point, wires and engine.

Note: Preparation before testing - When the car is off, please start the car engine first.