GONGJUE GJ-8018LCD Hot Air Gun Desoldering Soldering Station is Hot Air ICs SMD Desolder For BGA Nozzle. 110V/220V GJ-8018LCD portable hot air soldering Gun + 4 Nozzle for bga rework repair. GONGJUE GJ-8018LCD AC 110V 200W Temperature-controlled Hot Air Gun with LCD digital display screen to show the hot air temperature used as BGA Rework Station.

GONGJUE GJ-8018LCD Hot Air Gun Desoldering Soldering Station 110V/220V GJ-8018LCD portable hot air soldering Gun  + 4 Nozzle for bga rework repair

GONGJUE GJ-8018LCD AC 110V 200W Temperature-controlled Hot Air Gun with LCD digital display screen used as BGA Rework Station

2 Types For Choose: (pls help leave message which one need after order, thanks)
220V 450W Double Round Plug
110V 200W Two Flat Plug

GONGJUE GJ-8018LCD Hot Air Gun Description:

This product has a breakthrough in hot air gun technology that it gives up traditional ways of supplying air by diaphragm air pump and power by transformer. It has LCD digital display screen to show the hot air temperature. That is suitable for most SMT parts desoldering, protecting components.

Power Supply: AC 110V And 220V
Power: 200W And 450W
Working Temperature: 450℃
Size: 290x20mm/11.4''x0.8''
Cable Length: 140cm
Model: GJ-8018LCD

110V/220V GJ-8018LCD portable hot air soldering Gun instruction/User Manual:

1.Turn on the Air firstly.
2.Rotate the heater switch to adjust the temperature, please turn up the temperature slowly. If not, the working life of the machine will be shorten.
3. You’d better keep the temperature under the temperature of 450℃.
4.Do not work over 10 minutes.
5.Be careful when using the hot air gun.
6.Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed.

GONGJUE GJ-8018LCD Hot Air Gun Desoldering Soldering Station Features:

Compact design, easy to use and carry.
LCD display for hot air temperature, convenient for operation.
Come with 4 different nozzles to meet different soldering needs.
The temperature and air volume can be easily and precisely adjusted.
Suitable for surface soldering and rework, such as SOIC, CHIP, QFP, PLCC, BGA, etc.
High quality engine and heating elements which can supply natural and gentle wind.
Special soldering way without touching the solder joint which avoid the parts moving and thermal shock.

Why Choose GONGJUE GJ-8018LCD Hot Air Gun Desoldering Soldering Station:

◆It has fine exterior,which is easier to use and carry
◆It adopts imported engine and heater element the air produced is natural and the
quantity of heat is even at the air mounth.
◆LCD display hot air temperature,digital constant temperature,it is very convenient for user
◆A new wat of soldering tin,no need to torch the soldering point
◆It suitable to soldering tin and removing tin from surface of parts

GONGJUE GJ-8018LCD Hot Air ICs SMD Desolder For BGA Nozzle Note:

Please read the instruction carefully before using！！
1.Please do not block or cover air entrance and hot air exit
2.Please do not blow the hot air to people directly
3.After turn on the power of hot air gun,operators must stay in the workspace
4.Please don't dismantle this without permit all the repair should be sent to anuthorized
service center,make sure safely
5.Never allow children to use the product

GONGJUE GJ-8018LCD Hot Air ICs SMD Desolder For BGA Nozzle Package include:

1 x GONGJUE GJ-8018LCD 110V 200W Hot Air Gun
1 x bracket
4 x nozzle
1 x GONGJUE GJ-8018LCD Hot Air Gun instruction User Manual