- Home > Automotive Car Diagnostic Tool > MASTER MST-1000 Automobile Motor Igniting Signal Tool MST-1000 Car spark plugs and ignition coil Tester
MASTER MST-1000 Automobile Motor Igniting Signal Tool is Auto ignition pulse scanner. MST-1000 Igniting Signal Tool support Spark Kvolt calibration function. MST-1000 Car spark plugs and ignition coil Tester for checker MS KV RPM.
MASTER MST-1000 Automobile Motor Igniting Signal Tool MST-1000 Car spark plugs and ignition coil Tester
MST-1000 MST1000 MASTER Automobile Motor Igniting Signal Tool
MST-1000 Split-free, wire-free, contact-free, probe close to the high-voltage wire to directly detect ignition signal.
Measure the ignition timing on the ignition signal (MS).
Measure the voltage on the ignition signal (KV).
Measure engine RPM.
Reasons to Buy MASTER MST-1000 Automobile Motor Igniting Signal Tool:
1. Capacitive pick-up
2. Flexible probe
3. Protective rubber holster
4. LCD display
5. Power ON/OFF/RESET button
6. Secondary Function/Capture button
7. Ignition system button
8. Main Function/Calibrate button
9. Engine Cycles button
Automobile Motor Igniting Signal Tool MST-1000 Functions:
1. Minimum and Maximum functions (for COP and SPW modes)
The MST-1000 maintains a continuous record of the minimum and maximum readings of the function currently selected.
To display the Minimum and Maximum readings of the main display, if not already selected press ' secondary function / capture ' button momentarily.
To reset the Minimum and Maximum readings, press the ' power on /off/ reset ' button momentarily. These values are also reset when turning the unit on.
Note: For the tachomenter function ( RPM) all Minimum and Maximum reading on the secondary displays are shown with the last digit rounded to '0'.
2. Spark Kvolt calibration function ( for COP mode only)
The MST-1000 requires the user to calibrate the instrument in order to measure spark Kvolt in coil on plug and coil near plug ignition systems. This calibration uses the measurement values obtained during the procedure to find the optimal measuring parameters or a particular type of ignition module , and compensates for differences in wave form and signal strength.
Once the MST-1000 has been calibrated on one of the ignition modules of the engine being diagnosed, all the subsequent measurement of spark Kvolt will be relative to the calibration value.
To calibrate the MST-1000, follow the procedure as described in ' 3.4.2 Measureing coil on plug and coil near plug ignition systems '.
MST-1000 Car spark plugs and ignition coil Tester Package including:
1pc x MST-1000 host
1pc x Color box
1pc x The cloth
1pc x The battery
1pc x CD
Contacts:
Website: www.obd2store.com
Skype: obd2store@outlook.com
Email:obd2store@outlook.com
What;s app: +86 13691674080
Contact information:
Website: www.obd2store.com
Email: chinaobd2store@gmail.com
Skype: sales-obd2store@outlook.com
Whatapp/Wechat: +86-19870637508